Introduction to biogas dehydration pry
Biogas is a mixed gas produced by microbial fermentation of organic matter under anaerobic conditions. It belongs to the category of clean energy, but different purification treatments such as desulfurization, dehydration, dust removal, etc. are required for biogas during use depending on the process.
Hangzhou Linuo Machinery Equipment Co., Ltd. is a professional enterprise specializing in the design and production of gas pretreatment equipment. With over 20 years of design and production experience, our products' performance is fully guaranteed.


As shown in the figure, the biogas dehydration and purification pry integrates pre filtration, condensation dehydration, pressurization, fine filtration, temperature regulation, automatic pressure regulation, flow monitoring, and biogas component analysis. The whole pry system is independent and complete, with automatic control and monitoring of temperature, pressure, flow and other data both locally and remotely. The electrical control protection level is IP54, and the allowable load fluctuation range is 0-100%, which meets the large load fluctuations during biogas operation and fully considers energy-saving design.
The biogas dehydration and purification pry adopts a reasonable layout structure, with a beautiful appearance and easy maintenance; Due to its inclusion of various functions for biogas purification, only flange connections for biogas inlet and outlet are reserved, which greatly shortens the construction period of biogas projects on site. The biogas purification pry block shown in the picture is the preferred choice for large and medium-sized biogas projects.
Related news
Hangzhou Linuo’s radar‑based liquid level and drainage equipment, compared with conventional systems such as mechanical float‑type, electronic, and ultrasonic devices, operates by discharging liquid while preventing air from entering—featuring an air‑blocking discharge design. This ensures stable, high‑capacity drainage and remains unaffected by the turbidity of the fluid being discharged, making it the preferred choice for high‑end projects, critical infrastructure, and complex operating conditions.
2026-06-08
Hangzhou Linuo’s hydrogen sulfide gas drying system precisely addresses the challenges of high-humidity corrosion and is compatible with a wide range of new‑material chemical production applications.
Linuo’s hydrogen purification system powers wind‑to‑hydrogen production, featuring dual‑tower temperature‑ and pressure‑swing regeneration combined with intelligent, unattended operation, delivering an efficient, stable, and smart purification solution for off‑grid wind‑to‑hydrogen applications.
Copyright ©2024 Hangzhou Linuo Machinery Co., Ltd. All Rights Reserved.
浙公网安备33018502002559号
Power by 300.cn